Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 29, No. 3 (2005)

Kenny Breeding

Kenny Breeding, Davenport, Va.

“I’ve come up with a quick way to seat the bead on the wheel rim of big truck and tractor tires. A lot of these tires are tubeless and are so big it’s hard to get enough air pressure to develop a good seal. My idea is kind of dangerous and a lot of care has to be taken, but it’s easy to do. First I separate the bead from the rim and patch the tire. Then I chain the tire down to something solid like a post or tree so it can’t bounce around (very important). Then, using a can of aerosol starting fluid, I spray a bit of ether inside the tire. Often I remove the valve stem and spray inside there. Then I fasten a piece of cloth to the end of a 10-ft. long stick and use it to ignite the fumes inside the tire. The resulting explosion will pop the bead back on the wheel rim.

“How much ether I use depends on the size of the tire. For a big tire I use about one-fourth of a 12-oz. can.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.