Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 29, No. 5 (2005)

Leonard Seltzer

Leonard Seltzer, Manhattan, Ill. ph 815 478-3578

“I came up with a simple T-shaped metal bracket made from 1 1/2-in. angle iron and flat steel plate that makes it easy to weld two pipes together at a 90 degree angle. It keeps the pipes from rolling around and getting off center.

“The bracket measures about 8 in. long by 5 in. wide. I use a small square to line up the pipes and a pair of vise grips to secure the pipes to the bracket.

“The bracket could be made to any size, depending on your needs.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.