There was a complaint in a recent issue from a reader in South Carolina who had trouble shifting his 5400 Deere tractor. I have one myself and clutch problems are common with this model because of a design problem. The clutch doesn’t line up properly and some of the parts are too light and tend to flex. This all adds up to the clutch sticking. There is an updated clutch rod for this tractor that helps a little but doesn’t fix the problem entirely. There is, however, an aftermarket clutch that is supposed to solve it. It was featured in FARM SHOW’s Vol. 30, No. 3 (T.C.M., Staceyville, Iowa ph 800 447-2161). Here’s what I do to solve the problem. I insert a fiberoptic scope into the inspection port on the side of the clutch to find the input shaft. Then I insert a small hose down into the housing so a small amount of oil can be applied to the shaft. It helps the binding problem without having to replace the entire unit.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.