Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 30, No. 6 (2006)

Make Your Portable Drill Work Like A Drill Press

Featured source: Don Bragdon

If you’ve ever wished you could put more down pressure on a handheld electric drill, you’ll be interested in this simple tool built by Don Bragdon of London, Arkansas.

“It makes any portable drill work like a drill press, making it much easier to apply down pressure,” says Bragdon.

The tool consists of a metal cup that fits over the end of the drill and an 18-in. long, 1/2-in. dia. metal handle that hinges on the cup. A hook is welded to the end of the handle to hold a piece of chain. The free end of the chain can be fitted with either a hook or a large magnet.

To use the drill, Bragdon attaches the magnet or hook to the working surface, and adjusts the chain links until the chain is tight. Then, while holding the drill with one hand, he uses his other hand to pull down on the handle to provide leverage.

“It makes drilling a much easier job,” says Bragdon.

“I came up with the idea because I’m in a wheelchair and sometimes can’t reach up high enough to apply adequate down pressure for drilling. With this tool I can drill anywhere I can reach.

“I use the hook any time I can find a place to hook it onto. When I’m drilling on a flat metal surface I use the magnet, which I bought for less than $10 at Harbor Freight. My only cost was for the magnet. Everything else was built from scrap metal.”

Contact: FARM SHOW Followup, Don Bragdon, 426 Rnd. Mtn. Ln., London, Arkansas 72847 (ph 479 293-4256).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.