Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 31, No. 1 (2007)

Robert Ferreira

Robert Ferreira, Crystal River, Florida

“I came up with a simple, portable 12-volt battery charger that works much like a car charging system. It works great for charging any vehicle with a dead battery. All the information on the wiring schematics that’s required to build this charging system can be found in any auto repair manual.

“The idea is to use a small engine to belt-drive a car alternator, which is used to charge the dead battery. I use a 4 1/2 hp Briggs & Stratton salvaged from an old lawn edger, and an alternator off a GM car. The engine belt-drives the alternator the same way a car engine does, and it allows the alternator to produce enough voltage to ‘excite’ the field. Both the engine and alternator mount on a wooden platform that I bolted onto the frame of the old 2-wheeled lawn edger. I mounted a homemade control panel on the cart that’s equipped with an amp meter, volt meter, and switches that came off a car.

“To charge a dead battery, all I do is start the engine and hook a pair of clip leads to the tractor’s battery. A small 12-volt lawn mower battery is used for the field.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.