“One day while I was in the field the power steering cylinder on my 1960’s Case 930 tractor fell out. Apparently the threads on the cylinder stripped, causing the cylinder rod to drop out. It was a good thing it happened in the field because when this problem happens the tractor’s steering wheels go wherever they want to go. I tried to find a new replacement cylinder and drag link but couldn’t. I was going to have the cylinder rethreaded, but then it would be too small.
“I solved the problem by drilling a 5/16-in. dia. hole through the drag link and also through the cylinder rod, and then I put a bolt through the hole and added lock nuts on it. Works great. I used a regular 5/16-in. hardware bolt so it can shear. Two years later it hasn’t sheared or been replaced.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.