Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 32, No. 6 (2008)

“Gas Feed And Filter” Keeps Fuel Flowing

Featured source: Terry Young

Terry Young had a problem with loose rust settling at the bottom of the gas tank on his International Harvester 706 tractor, causing the fuel line to plug up. The Coffeen, Ill., farmer found a simple way to solve the problem.

He added a short upright length of 3/8-in. dia. tubing inside the tank to raise the level of the gas intake about 1 in. above the bottom. That way, rust or other debris stays at the bottom of the tank. He also replaced the original sediment bulb with an in-line filter that’s easy to replace.

C. F. Marley, Nokomis, Ill., used the same idea on his IH tractor (pictured) but added a brass shut-off valve that makes filter replacement easy.

Contact: FARM SHOW Followup, Terry Young, 73 Young Lane, Coffeen, Ill. 62017 (ph 217 534-2456).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.