Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 33, No. 5 (2009)

Combine Steering Motor “Fine Tunes” Shop Press Work

Featured source:

Old combine hydraulic steering motors can be used to make a shop press easier to operate, says Orvie Wideman, Wallenstein, Ontario, who replaced the spool control valve on his shop press with a hydrostatic steering motor off an old Massey Ferguson 815 combine. He made a metal bracket to mount the motor on the press’s frame. A hydraulic pump, belt-driven by a 1 1/2 hp electric motor, is used to operate the steering motor. To move the press up or down Wideman simply turns the combine’s steering wheel.

“It works much better than the press’s original control valve because I can ‘feather’ the press up or down exactly where I want it. With such precision control I don’t have to rebend material nearly as often,” says Wide-man.

“I think the same idea would work on an H-style arbor press or leaf break.

“I bought most of the materials that I used at a salvage yard. I paid $125 for the steering motor and $75 for the hydraulic pump, which came off an old swather. I already had the electric motor.” Contact: FARM SHOW Followup, Orvie Wideman, 4155 Ament Line, R.R. 3, Wallenstein, Ontario Canada N0B 2S0 (ph 519 698-2911).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.