Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 33, No. 5 (2009)

Hammer Has A Chisel Inside

Featured source:

“It hangs on the side of my tractor in a pvc mounting bracket. I find all kinds of uses for it,” says Eric “Moose” Petrevich, Glen Gardner, N. J., about his homemade hammer with a chisel hidden in the handle. He made the hammer out of a 2-ft. piece of threaded 1 1/8-in. dia. steel pipe. The chisel is welded to the metal end cap that screws onto one end of the pipe. A hammer head is welded to the other end.

“I made it because I found that often whenever I needed a hammer I also needed a chisel,” says Petrevich.

“Carrying both tools all the time was a pain, and often the chisel got lost.” He drilled a hole in the end cap and stuck the chisel through so its hitting end extends just outside the end cap. The “Moose Mallet” fits inside a short length of pvc pipe mounted on his tractor. He also takes it scuba diving. A chain link welded to the top of the hammer head serves as a handy carrying loop. Contact: FARM SHOW Followup, Eric “Moose” Petrevich, 210 Route 513, Glen Gardner, N.J. 08826 (ph 908 638-3433; [email protected]).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.