Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 33, No. 6 (2009)

Gilbert F. Conn

Individual tip 1 of 3 from this reader’s published contribution.
Gilbert F. Conn, Pittsburgh, Penn.

“A case-hardened bolt broke off on my tractor’s water pump and I wasn’t able to drill it out, so I used a Dremel tool and four small grinding stones to do the job. The grindstones I used are 3/8 in. in dia. and pointed at one end. I would grind out a little of the bolt and then use an air gun to blow out the material. I wore out four grindstones before I was able to drill out all of the bolt. Then I rethreaded the hole and applied Loktite. The job took two hours, but it saved me from having to buy a new engine block.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.