Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 34, No. 4 (2010)

Keyway Solves Feederhouse Drive Problem On Deere Combines

Featured source:

“Our new variable speed drive sheave repair solves a problem with the lower feederhouse drive on many Deere combine headers. It also saves a lot of money,” says Martin Meister, Double M Machine, Inc., Fairbury, Ill. The drive is used on Deere 6620, 7720, 8820, 9400, 9500, and 9600 combine models, which were made from the late 1970’s up through the late 1990’s.

“The problem is that the original keyway that drives the cam inside the feederhouse wears to the point where the feederhouse no longer works,” says Meister.

“Without repairing the keyway you have to buy an entire new drive assembly at a cost of $750 to $800. We rotate our new keyway 90 degrees from its original position. It restores the drive to like-new condition.” Sells for $105 plus S&H. Contact: FARM SHOW Followup, Martin Meister, Double M Machine, Inc., 614 W. Pine, Fairbury, Ill. 61739 (ph 815 692-4676; [email protected]).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.