Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 35, No. 1 (2011)

Ted Slaght

Individual tip 1 of 2 from this reader’s published contribution.
Ted Slaght, Putney, Vt.

“My Ford 2N tractor doesn’t have good brakes. The seals leak all the time, allowing hydraulic and differential fluid to leak onto the brake shoes, especially when working on side hills. And once the shoes get wet they don’t work at all. It’s quite a job to change the seals, and eventually I’ll have the same problem all over again.

“To solve the problem, I cut a slot in the backing plate under the axle shaft and welded a metal trough on the inside part of the plate to catch any fluid that leaks down. Now any fluid that comes out runs into the trough and outside the backing plate, instead of running onto the brake shoes.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.