“I made a metal bender to fit my log splitter. It lets me bend metal without dulling the wedge,” says Milan Hochstetler, Cumberland, Va. The bender consists of a short length of heavy angle iron that mounts on front of the splitter wedge. A horizontal steel plate that’s welded on top of the angle iron rests on top of the wedge, and a short length of strap iron welded to the bottom of the angle iron rests on the splitter table. Square tubing welded onto the middle of the horizontal plate fits down inside the hollow wedge to hold it in place when bending metal. To convert back to splitting wood, Hostetler simply pulls the bender off the wedge.
“The splitter has 22 tons of pressure so it can do some heavy duty bending,” says Hostetler.
“My son and I recently used it to straighten a 1 5/8-in. dia. solid steel bar. We also used it to straighten one of the tines on a forklift.” Contact: FARM SHOW Followup, Milan Hochstetler, 174 Vogel Rd., Cumberland, Va. 23040 (ph 804 492-4295).
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.