Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 35, No. 2 (2011)

Steven Troyer

Individual tip 2 of 3 from this reader’s published contribution.
Steven Troyer, Millersburg, Ohio

“This homemade tool is designed to hold large center punches up to 1-in. in diameter. It keeps the operator’s fingers safely out of the way when pounding on the punch. A solid metal rod runs through the tool’s hollow body up to an opening that’s used to hold the punch. Rotating the knurled handle causes the rod to push against the punch and grip it tightly. Punch and chisel holders like this are also commercially available. They save on busted or scraped knuckles. McMaster-Carr sells one for about $33 (ph 630 600-3600; www.mcmaster.com).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.