Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 35, No. 3 (2011)

Tractor Loader Tool Holders

Featured source: Dan Bodda

“I just bought a new L4240 Kubota tractor cab and loader. I used to carry a toolbox in the cab of my last tractor and it was always in the way. So this time I decided to find a better way to hold a few chains, tools and pins,” says Dan Bodas, Pittsburg, Mo.

“The loader has two smaller 4-in. dia. tubes where the loader attaches to the chassis, and a larger 4 1/4-in. tube in the loader frame itself.

“I bought four 4-in. dia. pvc expander plugs, which make perfect covers in the ends of the tubes. The plugs expand so no adhesive is required to hold them in and you get a watertight storage compartment. The plugs cost just $5.99 each and come in different sizes.

“The 4-in. plugs fit perfectly into the two 4-in. pipes. They were a little loose in the bigger 4 1/4 in. loader tube so I bought a 4-in. pvc connector fitting and cut a slot in one side to allow it to slip inside the loader tube. The expander plugs fit perfect into the pvc inserts.” Contact: FARM SHOW Followup, Dan Bodas, HC 77, Box 1043B, Pittsburg, Mo. 65724 (ph 417-327-6767; [email protected])

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.