Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 36, No. 4 (2012)

George Bagnall

Individual tip 2 of 2 from this reader’s published contribution.
George Bagnall, Paincourt, Ont.

“I stripped the threads in the aluminum head on a GM engine that held the power steering pump in place. I used 7/16-in. redi-rod to tap into the hole without drilling. Put loctite on the redi-rod and applied a nut. It was a metric hole but it tapped easily to the 7/16-in. redi- rod.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.