Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 36, No. 4 (2012)

John W. Collins

John W. Collins, Sherburne, N.Y.

“My new Cub Cadet riding mower equipped with a 60-in. deck was mowing low on one side. It needed to be adjusted. I knew there had to be a better way to measure than using a tape measure. So I cut a 1-ft. long piece off a 2 by 4 and cut the piece at an angle. I slid this angled piece under the deck at each end, both front and back. Then I put a mark on top of the angle for each point checked. The difference was readily visible, and I was able to raise the low side up to match the other side, as needed.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.