Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 36, No. 6 (2012)

Joe Germuga

Joe Germuga, Rochester, N.Y.

“I came up with a simple way to make a saddle cut on pipes using a chop saw. I made a 33 degree angled jig that sits against the backstop of my saw. You place the pipe on the table against the jig and cut off the corner of the pipe. Then rotate the pipe 180 degrees and cut the other side the same way. You get a clean cut that fits nicely against another piece of pipe. It helps to practice a bit on some scrap pipe and to cut slowly because you’re cutting on the end of the pipe.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.