Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 37, No. 3 (2013)

Vern Goodwin

Individual tip 1 of 3 from this reader’s published contribution.
Vern Goodwin, Lincoln, Neb.
Vern Goodwin
Photo: FARM SHOW · Vol. 37, No. 3 (2013) · p. 36

“I came up with an easy way to carry sockets to a job site. I screwed 3 socket-holding metal strips onto a 2-ft. long, 4-in. wide piece of kitchen countertop. I keep a 6 and 12-point socket next to each socket size.

“It really comes in handy with rounded off nuts and bolt heads. For example, if a 7/16-in. socket won’t catch on the bolt head I can quickly switch to the corresponding 6 or 12-point socket, which has a better chance of grabbing all sides of the bolt head. I drilled a big hole into one end of the tray to hang it on my shop wall.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.