Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 38, No. 1 (2014)

Ron Mickle

Ron Mickle, Thorp, Wis.

“A friend of mine needed help repairing a hay rake over the summer, and we used a common repair technique with a new twist. If you break the head off a bolt or stud, the common repair method is to weld a nut onto the remaining stem. But if you’re using a wire welder it’s hard to get a solid weld, stud to nut. A better way is to weld a cut washer to the stud and then weld a nut to the washer.

“To use this technique, both the washer and nut must have no plating. Be sure to clean the area around the stud thoroughly, as oil and other substances may contaminate the weld.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.