Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 38, No. 1 (2014)

Ken Grazier

Ken Grazier, Havre, Mont.
Ken Grazier
Photo: FARM SHOW · Vol. 38, No. 1 (2014) · p. 37

“I made a ‘pickup’ tool that really comes in handy around my place. It has a magnet at the top for picking up nails, bolts, and other small parts. It’s 4 1/2 ft. long and made from a length of 5/8-in. conduit. There are 4 tools welded onto it at the bottom – a J hook, a pliers, a screwdriver ‘poker’, and an open-end wrench.

“I used a 3-in. long cow magnet mounted inside a short length of light channel iron on top, then screwed the channel iron onto the conduit. I added a short wooden handle that slips down over the conduit and is riveted to it, making the tool more comfortable to carry around.

“The spring-loaded pliers at the bottom are attached to a cable that runs up through the conduit to a metal ring at the top. The pliers stay open until I pull on the ring. When I let go of the ring, the pliers automatically open back up. I also welded on an open-end wrench and a bent screwdriver. I use the pliers to pick up trash, the open-end wrench to dig out dandelions, and the screwdriver to pick up trash and also to dig out dandelions.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.