Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 38, No. 2 (2014)

James Gerdin

James Gerdin, Braham, Minn.

“I use my drill, some 3/8-in. redi rod, and a square piece of denim to clean out the wheel hubs on tractors and implements before installing new bearings. I cut out several square pieces of denim slightly larger than the hub, then sandwich the denim between 2 washers and nuts on the redi rod. It’s a simple, quick way to clean out hubs.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.