“Installing the remote hydraulic couplers on my Deere tractors can be a difficult job. I’ve got to carefully hold the coupler with one hand so the O-rings don’t fall out, and put bolts in with my other hand. The remote couplers are big and heavy, and it’s an awkward place to get at. To solve the problem, I found a couple of bolts that were about 1 in. longer than the original ones and cut the heads off to make a stud bolt. I also made a little point on them. I used both hands to set the coupler on the 2 stud bolts, which are loosely screwed into place. Then I put the other 2 bolts in the bottom, took the 2 stud bolts out, and put the original bolts back in.
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.