Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 38, No. 6 (2014)

Lawrence Schaub

Lawrence Schaub, Belle Fourche, S. Dak.

“Regular maintenance of my New Holland 855 round baler is very important because of the poor design of some of the components on this chain-driven baler. For example, the bale rollers ride on ball bearings that need regular oiling or they will quickly go bad. They each cost $50.

“Also, there are 10 rollers on this baler and it’s not only very expensive to replace them, it’s also a major job.

“The baler came with a 2-gal. plastic container that holds oil. It lubricates the chain-drive with a 1/8-in. plastic tube when the door is open. However, the door is open only long enough to oil part of the chain. So I mounted hooks on each side of the baler to hold a 5-gal. pail of oil with a 1/4-in. tube feeding out the bottom. Before I start baling, I hang up the pails and engage the pto drive, running the machine until the chain is well-oiled. Then I take the pails off the baler and I’m ready to bale.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.