Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 38, No. 6 (2014)

Robert VonKamp

Individual tip 1 of 2 from this reader’s published contribution.
Robert VonKamp, ([email protected])

“I read with amusement in your last issue how Steve Cunningham of New Hampshire took a sledge hammer to a Tecumseh engine after years of hard-start problems. I have also been tempted to make the same ‘adjustment’ to one of these engines. However, I may have a solution for other sufferers. I discovered by accident that if I leave the fuel cap loose after filling and then pump the primer bulb on the carburetor, the engine will start more easily, usually on the first or second pull.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.