Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 39, No. 3 (2015)

Brad Miller

Brad Miller, Ridgeville Corners, Ohio
Brad Miller
Photo: FARM SHOW · Vol. 39, No. 3 (2015) · p. 36

“Here’s a way to make some handy spring clamps. A short length of pvc pipe and 2 dowel rods are the only materials required. Drill 2 holes through the pipe at a 90 degree angle from each other. The holes should be slightly smaller than the diameter of the dowel rods so the rods will fit snuggly into them and serve as handles. The thicker the pvc is or the wider the piece that you’re working on is, the more squeeze pressure you’ll have.

“Split lengths of vinyl tubing can be added to keep the pipe’s sharp edges from marring the surface of your project.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.