Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 40, No. 3 (2016)

Garry Hoffman

Garry Hoffman, Killaly, Sask.

“Anyone who has ever used a 3-jaw puller knows how frustrating the experience can be. However, wrapping the jaws with a vise grip chain changes the whole experience.

“First, get the puller behind the bearing any way that it will stay. Wrap the chain around the jaws as shown without tightening it too much, and then loosen the puller slightly. The jaws will now tighten around the shaft behind the bearing. You can move the jaws around the shaft until they’re equally spaced.

“Next, tighten the vise grip chain as much as possible and then re-center the puller bolt, if it’s not already centered. Now you can pull off the bearing with a lot less frustration, because the puller won’t fall off and it’ll have a lot more gripping power.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.