Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 40, No. 6 (2016)

Doug Clark

Doug Clark, Ilderton, Ont.

“In your last issue, you had an article on a fellow who sharpens his chainsaw with a cutoff blade. Wow! He must have hands and eyes as steady as a brain surgeon. As for me, I’m sure I’d end up cutting the chain. I have a professional electric saw chain sharpener that’s very accurate and simple to operate, but it takes forever to sharpen a chain and I need to take the chain off the saw and mount it in the sharpener. As a result, I rarely use that sharpener.

“Instead I use a stone in a cheap die grinder that works like a charm and is much faster. A kit from Oregon (available at TSC or Canadian Tire stores) contains 3 grinding stones for different-sized chains and sells for about $7. It takes me about 4 to 5 min. to sharpen a 16-in. saw chain using a compressed air die grinder without removing it from the saw. It’s extremely easy to do and leaves a better edge than a file. These stones will sharpen a chain 40 to 50 times before wearing down too far. I place the outer tip of the stone into the hook of the tool before starting the grinder so I can slide the stone up until the shaft end gets to the tooth, and then back down in just a couple of seconds to keep the tooth from overheating.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.