Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 41, No. 4 (2017)

Douglas Edwards

Douglas Edwards, Englehart, Ontario
Douglas Edwards
Photo: FARM SHOW · Vol. 41, No. 4 (2017) · p. 32

“I made a rig to hold lawn mower blades in a vice to make it easy to sharpen them at the right angle. I like using a good file to sharpen because it does the best job.

“I use a short piece of angle iron, facing downward, to fit into the vice. Then I welded another piece of angle iron to the top of it, facing up. I drill a hole through this bracket so I can bolt the blade down onto the bracket. I sharpen one side and then remove the nut and flip the blade to do the other side. Holds the blade solidly so I can sharpen at the original angle.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.