
“New cordless drills and sawzalls are often sold in plastic tool cases mold-formed to contain a particular tool. Using a sharp utility knife, I convert such tool cases into handy, general purpose toolboxes that will never rust. The photo shows how I converted an 18-in. long, 14-in. wide, and 6-in. deep tool case to store a big hammer drill as well as drill bits and wall anchors.
“I cut out any spot welds inside the tool case and use a pliers to remove any plastic plugs. I also trim away part of the tool case’s outer edge, making sure not to cut out too much so the tool case won’t lose its strength. Then I use sandpaper anywhere I’ve made a cut to remove the sharp edges. If the tool case’s hinges are broken, I make new ones by screwing on pieces of old shoe leather.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.