Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 41, No. 4 (2017)

Matt McNaughton

Matt McNaughton, Foothills, Alberta
Matt McNaughton
Photo: FARM SHOW · Vol. 41, No. 4 (2017) · p. 33

“I often use a string line to help align fences and walls, and I had been winding up the string around a 1 by 4 board with notches cut into one end. However, the string always seemed to get twisted and the wind-up process took too long.

“To make the job easier, I drilled a hole into one end of a 9-in. dowel and screwed a 1/4-in. threaded shaft into it. I also mounted 2 large wooden washers onto the dowel to keep the string in line. There’s enough room at the opposite end of the dowel for a loose hand hold.

“To wind up the string, I just insert the threaded shaft into a cordless drill and start it up. Works like a charm.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.