Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 41, No. 4 (2017)

Ralph Reid

Ralph Reid, Bynum, Ala.

“I came up with a self-oiling drill bit by capping off the hole at the base of my drill press where the bit goes through, and then filling the hole with oil. I then welded a 1 1/2-in. dia. threaded metal pipe fitting into the hole and put a plug in it. As a result, the bit automatically gets oiled every time I’m drilling and stays cooler. Works great.

“If the hole fills with metal shavings I just unscrew the plug and clean out the shavings, then refill the hole with oil. I do a lot of drilling where I work and have drilled up to 2,000 holes on a single job, so this idea saves me a lot of time and hassle.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.