Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 41, No. 4 (2017)

Solid Outdoor “Workbench” Great For Pounding

Featured source: Douglas Edwards
Solid Outdoor “Workbench” Great For Pounding
Photo: FARM SHOW · Vol. 41, No. 4 (2017) · p. 34

“I’ve used this outdoor workbench for many years. I made it from a 3-ft. long piece of 4-ft. dia. steel pipe,” says Douglas Edwards, Englehart, Ontario.

“I first put a couple inches of concrete in the bottom of it and then filled it up to about 10 in. from the top with gravel. Then I filled it up with concrete so it’s level with the top. A piece of 1-in. thick steel plate with bolts welded to the underside was pushed into the wet concrete to hold it firm. I also inserted a few bars to use for bending and attached a vise to the side of the pipe.

“This circular workbench is ideal for swinging a heavy hammer when you need to straighten something out. I enjoy working outside so I often use my torch and welder on this heavy table.” Contact: FARM SHOW Followup, Douglas Edwards, 287065 Spruce Grove Rd., Englehart, Ont. Canada P0J1H0.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.