“I use my table saw a lot for projects using mostly 5/8 and 3/4-in. thick oak and other hardwoods.
I have to make a lot of 90-degree cuts but was having trouble keeping my saw guide at precisely 90 degrees on repeat cuts.
“To solve the problem I bought a 3-ft. length of 3/4-in. wide, 3/8-in. thick hot rolled steel and a length of 2-in. channel iron. It serves as a cross piece. I carefully squared up the 2 pieces and then arc welded them together. I’ve made 3 different saw guides this way - one for 90-degree cuts and the others for 45-degree cuts.
“My homemade saw guides are a real time saver because they eliminate the need to ever check the angle degree. I bolted a long 3/4-in. thick board onto the channel iron that extends over the edge of the table saw and serves as a handhold. As I’m working I hold onto the board with both hands to make sure I get a nice, square cut. The board can easily be replaced if I happen to nick it with the saw.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.