Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 41, No. 5 (2017)

G.F. Donk

G.F. Donk, Clyde, N.Y.

“The drive pulley on my Ford flail mower worked loose and stripped the splines, so I had it replaced with a Browning clamp-on spline hub (www.applied.com/c-browningshq1hub/p/100790189). Bergman Electric in Auburn, N.Y., performed the work. The pulley was held in place by a snap ring, and once it worked loose I couldn’t find a way to secure the pulley. A factory replacement pulley would have cost about $300. The Browning clamp-on spline hub was still a fairly expensive solution but it solved the problem.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.