“I got tired of wearing out my arm stirring paint cans. So I came up with an automatic paint can shaker that saves a lot of time and hassle,” says William Hettler, Federalsburg, Md. A 1/3 hp electric motor belt-drives a right angle gearbox to reduce the speed. Hettler cut a groove next to the hub of a small pulley on the gearbox and welded in a vertical bolt, on which he installed an idler pulley with ball bearings. He bolted a metal plate on top of the idler pulley and then bolted a pitman arm to the plate. The pitman arm pushes and pulls a home-built metal basket that’s sized to hold a 1-gal.
paint can. The basket is welded to a pair of heavy duty hinges that pin onto the end of the pitman arm.
“It works great. I made it last spring and have already used it a lot,” says Hettler.
“The pitman arm pivots back and forth on the idler pulley, which causes the basket to rock back and forth about 2 in. I used light duty angle iron to make the basket and use a bungie cord to hold the paint can in place. The whole assembly mounts on a board that’s easy to move around.” Contact: FARM SHOW Followup, William Hettler, 5816 Davis Mill Pond Rd., Federalsburg, Md. 21632 (ph 410 754-0005).
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.