Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 41, No. 6 (2017)

Garage Door Panels Used To Finish Farm Shop

Featured source: William Brauer

William Brauer made a good looking insulated ceiling for his farm shop using garage door panels that he got as seconds from a nearby factory. Installation was easy.

“I installed 2 by 2’s at the bottom of the trusses in my 30 by 60-ft. shop and laid in the panels like a drop ceiling,” says Brauer.

“I used the whole door, up to 10-ft. widths. They have 2 in. of insulation sandwiched by metal panels. The sandwiching makes a rigid panel so there is no sagging.” Once they were in place, he laid another 3 1/2 in. of insulation on top and covered it with Tyvek. It helps keep his shop warm. When he started the project, he was buying seconds from a nearby factory. That ended when garage door retailers began buying the seconds. They were using them to replace rusted doors that were still under warranty.

“The factory stopped selling seconds altogether,” says Brauer.

“However, the retailers couldn’t get rid of the bad doors they replaced, so I started picking them up.” Brauer traveled to dealers between Chicago and the Quad Cities to pick up doors.

“I didn’t care what color they were on the outside because they were always white on the inside,” says Brauer.

“With their seals, they fit together real well.” Contact: FARM SHOW Followup, William A. Brauer, 28W574 Garys Mill Rd., Winfield, Ill. 60190 (ph 630 231-2250).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.