Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 42, No. 2 (2018)

Jerry Lanser

Jerry Lanser, Longmont, Colo.
Jerry Lanser
Photo: FARM SHOW · Vol. 42, No. 2 (2018) · p. 33

“I have a 4 by 8-ft. freestanding workbench which works great, but there was never enough room to store commonly used tools close by.

So I built a storage carousel that keeps my tools readily accessible, yet I can quickly move it out of the way if necessary. I keep the carousel on a nearby table.

“An old truck brake drum serves as the base. I welded an 11-in. length of 3/4-in. dia. pipe vertically to the center of the base, then inserted a 45-in. long, 3/4-in. dia. solid vertical rod onto which I had welded three 10-in. angle iron wings. The wings support a 3/4-in. thick by 24-in. dia. plywood tray.

“I drilled a series of different size holes about 1/2 in. from the outside edge of the tray in order to store screwdrivers and pliers, etc. The inner part of the tray holds an assortment of items, including tape measures, a drill bit rack, knives, pencils and other general use items. I located the tray at least 12 in. above the table so larger screwdrivers won’t drag on it.

“I also placed a layer of pegboard on either side of the vertical bar. The pegboard can either be attached to the rod or allowed to spin independently of the bar and tray.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.