Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 42, No. 3 (2018)

David Norman

David Norman, Bay St. Louis, Miss.

“I keep hydraulic floor jacks in 4 different pickups. I gave each jack an extra 2 in. of lifting height by welding a 4-in. length of 2-in. square tubing onto it. I removed the pin that secures a steel cup to the jack lift arm and welded the tubing on. Then I drilled a hole in the tubing, placed the cup on top of it, and reinserted the pin.

“The extra 2 in. of lift can often eliminate the need to use spacers when changing a flat tire.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.