Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 42, No. 6 (2018)

Mark Johnson

Mark Johnson, Park Rapids, Minn.

“I’ve extended the life of many bearings and bushings by drilling a 1/16-in. dia. hole through the seal and using a needle to inject them with grease. I seal the hole with a dab of silicone to form a gasket, if needed.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.