“I needed a swivel hook to use on my engine hoist so I made one out of a piece of heavy-wall steel tubing. I used a 2 1/8-in. long piece of 2-in. sq. tubing. I cut a slot in the top of the tubing for a chain link to slip through. The link is held in place by a 1/2-in. grade 8 bolt with a lock nut. A hook with a threaded shank fits into the bottom of the tubing, held in place with a castle nut and cotter pin so it can’t come unscrewed.
“This swivel is especially handy when removing my quick hitch, which is too heavy for me to lift by hand. Space is very limited in my shop so I was always fighting to keep the hitch from twisting while it hung from the chain. The swivel makes handling much easier whenever I need to turn a load.
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.