Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 43, No. 3 (2019)

Steve Faber

Steve Faber, Tiffin, Ohio

“The sweeps on my field cultivator use 3/8-in. dia. bolts, but I wanted to use a sweep that takes larger bolts. As a result, the square under the head of a 3/8-in. plow bolt wouldn’t take hold. Bolts with oversize heads are available, but I didn’t have any. So I took a couple of larger bolts I already had and drilled and tapped them to 3/8-16. I then cut off the heads and used hex head bolts to mount the sweep.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.