Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 46, No. 4 (2022)

Mark Gumpert

Mark Gumpert, Grand Junction, Mich.
Mark Gumpert
Photo: FARM SHOW · Vol. 46, No. 4 (2022) · p. 32

“I got tired of changing corner insulators on posts over the years. I thought there had to be a better way of doing it. I’ve used the wrap-around post insulator but over the years they get little pinholes in them, and then you have a short in your wire that’s hard to find. I wanted something simple and durable. I came up with an idea I’ve been using for about a year now and it holds up great.

“I made a die for my pipe bender. I used 1 1/4-in. flat stock, made a U-shape, and put three 3/8-in. holes in it. One is to lag or bolt to the post. You can use a 3/8-in. by 3-in. galvanized lag screw or a carriage bolt. The other holes are for the pin that holds the insulator in the bracket and put the pin through. If insulators break or crack, just loosen the fence, pull the pin, slip in a new insulator, then tighten up the fence and it’s done. Very simple and it works for ceramic or plastic insulators.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.