Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 46, No. 4 (2022)

Made-It-Myself Welding Table

Featured source: Scott Ravenkamp, Verdigre, Neb.

Scott Ravenkamp needed a welding table in his shop. He had previously used the main frame of a 40-ft. rod weeder to add a loft to his shop, so he had the rest of the components from the weeder to work with.

“I used the rockshaft from the weeder and the arms it was attached to make the table,” says Ravenkamp.

“The rockshaft was 6-in. dia. steel tubing that I used for the legs with 3 by 5-in. tubing framing the steel grate that I used for the top. I welded nuts into the grate to match bolt holes in the bases of my vises.

“I can bolt the vises in place or quickly remove them if I want a smooth top,” says Ravenkamp. Contact: FARM SHOW Followup, Scott Ravenkamp, 52570 883 Rd., Verdigre, Neb. 68783 (ph 719-740-0705; [email protected]).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.