Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 48, No. 1 (2024)

Cleanout Door Cut In Skid Steer Frame

Featured source: Simon Oyler, Delphi, Indiana
Cleanout Door Cut In Skid Steer Frame
Photo: FARM SHOW · Vol. 48, No. 1 (2024) · p. 32

Indiana crop and livestock farmer Simon Oyler has a simple way to clean out trash, dirt, and other materials from inside the pan of his and his dad’s L220 and L230 skid steer loaders.

“Instead of having to vacuum or blow out all the crud from inside the chassis, I cut a small trap door on the front of the frame where the hydrostatic motors are. Now I can blow out or wash out the debris, then replace the plate cover until it’s time to clean it again.” After cutting the frame, Oyler made a plate to cover the opening, then drilled tap holes and screwed the cover in place.

“It’s a simple idea that doesn’t affect the machine operation,” Oyler says.

“Now, when we tip up the cab to clean the machine, we remove the cover, and cleanout is very easy.” Contact: FARM SHOW Followup, Simon Oyler, Delphi, Indiana.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.