
When Brent Uffelman needed to move his small farm equipment and trailers in and out of his sheds, he created a small device he could use with his propane-powered forklift to simplify the task.
As his forklift started more easily in the cold Nebraska winters than his diesel tractor, it seemed the obvious choice for the job.
With his son, Conner, he used scrap metal from his yard to build 3 by 5-in, 1/4-in. thick rectangular tubing frames to slide over his forklift’s tines. To secure the frame, he welded short, hooked chains onto the rear to latch into D-rings welded to the forklift mast.
Each end features an upright hooked support to engage the outer pins on 3-pt. hitch tools and equipment. He installed a quick hitch and turnbuckle on the front to reach the necessary height to move small implements like shredders and blades. He installed a square tubing sleeve at the center front for a reversible 2-in. receiver hitch, which can be used with a 2 or 2 5/16-in. ball or spade hitch.
“I just pull a pin and slide in the hitch I want to hook up to,” Uffelman says.
“With the good visibility, I can drive right up to something, hook up, lock the implement on the quick hitch, and drive away. The forklift does all the heavy lifting without requiring any dollies.”
He says his mover can also be used on tractor-mounted front-end loaders or skid steers, if necessary, but he likes the convenience of his forklift as he can quickly get on or off for adjustments.
“It’s more user-friendly and maneuverable for fitting my equipment into tight spaces in my storage sheds,” he says.
Uffelman paid about $200 for the quick hitch and around $115 for the steel.
Contact: FARM SHOW Followup, Brent Uffelman, 1217 Road V, Waco, Neb. 68460 (ph 402-366-4893; [email protected]).
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.