Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 49, No. 2 (2025)

Larry Wood

Individual tip 3 of 3 from this reader’s published contribution.
Larry Wood, Waldo, Ohio

“I pick up lots of equipment with my skid steer forks, but I was always afraid that my lifting straps or chains would slip off the end of my forks. I drilled a 1/2-in. hole near the end of my forks. Then, I made a U-shaped steel strap and welded a 1/2-in. bolt to the bottom of the strap. Now, I have no fear of the straps slipping off. I also welded a 1/2-in. nut to the fork frame to store the new brackets. Now, I always have them with me.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.