Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 49, No. 5 (2025)

Glenn Manning

Glenn Manning, Rochester, Ill.

“When one of my older shop-type vacs (with 2-in. suction and exhaust/blower ports) failed, I cut the cord off and turned it into a ‘pre-filter’ for my better vac.

“Using a 2-in. suction hose (available as an accessory), I connected the exhaust port of the old vac to the suction port of the good vac, then connected the conventional pick-up hose to the suction port of the old vac.

“I keep good filters in both units and most of the crud remains in the old unit as the good unit provides only suction (slightly reduced), not direct pickup.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.