Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 49, No. 6 (2025)

Outlet Controls Heat When It’s Needed

Featured source: Farm Innovators, Plymouth, Ind.
Outlet Controls Heat When It’s Needed
Photo: FARM SHOW · Vol. 49, No. 6 (2025) · p. 34

Save money by turning on heaters only when needed with a Thermo Cube thermostatically controlled outlet. Whether it’s an engine block heater, heat tape, heat lamp, or stock tank heater, why use electricity when it isn’t necessary?

Plug a Farm Innovators Thermo Cube TC-3 outlet into a wall socket before connecting a heating or fan device. When you plug your cold-weather heater into the TC-3 outlet, it powers on only when the temperature falls below 35 F. When the ambient temperature exceeds 45 F, the power supply stops.

Using a TC-3 not only saves on electricity costs but also prolongs the heater’s lifespan. It works with any 15-amp, 120-volt electric heater or fan used at home or on the farm.

As a secondary benefit, it converts any standard outlet into a double receptacle capable of supporting up to two devices. The company suggests using it as a freeze-warning system for furnace failure when you’re away from home. Plug a lamp that’s visible to a neighbor into the TC-3. It’ll turn on the lamp if the furnace stops working and the temperature in the house or outbuilding drops below 35 F.

The Thermo Cube TC-3 is sold by many retailers and online stores. It usually costs around $20, but you can find it for as low as $14.99. Other models are available for 0 F, 20 F, and fans. Farm Innovators is a family-owned Indiana company with 40 years of experience in heating, agricultural, industrial, and home-use products.

Contact: FARM SHOW Followup, Farm Innovators, P.O. Box 452, Plymouth, Ind. 46563 (ph 574-936-5096 or 800-277-8401; [email protected]; https://farminnovators.com).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.