Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 49, No. 6 (2025)

Shop-Built Gantry Trailer

Featured source: Frank Surber, Peacock, Texas
Shop-Built Gantry Trailer
Photo: FARM SHOW · Vol. 49, No. 6 (2025) · p. 35

As an accomplished metalworker, Frank Surber isn’t afraid to tackle any homemade project, big or small. He mounted scaffolding on a school bus chassis to install the rafters, lighting and an overhead bridge crane inside his shop. A former oil field mechanic, he’s built welding trailers and a transmission jack, and has helped neighbors build useful equipment from scrap metal.

Surber recently built a heavy-duty gantry trailer for hauling propane tanks, totes and other items too large to fit inside a truck box. He built the framework using 2 3/8-in. oilfield tubing. The gantry beam is made from a 4-in. H-beam.

To raise and lower the payload, Surber installed a 3,500-lb. electric winch along with an old boat winch. He widened and split the drum to pay out and take up the cable for moving the hoist winch.

The hoist winch trolley is constructed from 1/2-in. plate steel with 1 3/4-in. dia. cam rollers. The trailer features a sturdy tongue hitch and rides on a pair of wheels from an old wagon. Surber says the gantry works well for safely lifting and hauling different-sized LP tanks and totes with sturdy metal frames.

Contact: FARM SHOW Followup, Frank Surber, Peacock, Texas.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.